HDD class: 6 – 8 tons

The ideal machine for fiber optic cables – the HDD drill DJ 13

The TERRA-JET DJ 13 is one of the most powerful HDD machine in the 6-8 tonnes class. It is more powerful, more productive and faster than its previous model.
With the HDD drill rig TERRA-JET DJ 13 you can drill up to 100 m (330 ft) and backream up to ø 300 mm.
The HATZ Diesel engine has a power of 55.4 kW (75 HP). Such engines usually are used in HDD machines of the 8-10 tonnes class.
Due to its high power the engine rotates with 2’300 rpm. This reduces the noise and the Diesel consumption. This HATZ Diesel engine fulfils the newest Stage 5 norms. No AdBlue required.

Made for productivity – highest drilling volume

The high-pressure FMC pump is on board. With an increased drilling volume of 95 ltr/min (25 gpm) contractors can face various challenging ground conditions. Optionally TERRA offers an industry-leading mud pump with even 160 ltr/min (45 gpm) of drilling volume.

High quality drill rods

The drill rods of the TERRA-JET DJ 13 are 2.0 meters long which means less drill rod changing and faster operation. With a bending radius of 28 m you can easily steer around existing pipes in the ground. The magazine is equipped with 90 m of drill rods.

Small and compact

With its compact design and increased movability the DJ 13 can drive through a 1.30 m wide entrance. The machine is steered by a remote control, fast and safely.

Oscillating Drill Ramp

TERRA has developed a new oscillating drill ramp. It has two rotation points with two cylinders. With this unique system, the drill ramp can move from 18% up to 40% (10° – 22°). The rubber crawler stays at the ground up to 36% for a good stability.

Double cylinder drive („DIRECT RAM“) – free of losses

THRUST and BACKREAMING of the driving saddle happens by a direct double cylinder drive („DIRECT RAM“). This is free of losses, robust and powerful. This new idea from TERRA allows maximum drilling and backreaming forces. Even at slow speeds, even with a short drilling ramp. The double cylinder operates in both directions with 60 kN (6 tons, 13,000 lbs). In the quick gear the driving saddle reaches 40 m/min (120 ft/min).
The driving saddle is supported by roles on top, at the bottom and sidewise.

Optimized drilling assistant systems

Intelligent drilling assistant systems like the thrust mode, carve mode, the ADBSe or the drill speed control make the drilling more efficient and more easy. The operator can relax, the machine does the work. The electronical CLP control manages all drilling assistant systems and feels the underground. Like this the machine operates at highest productivity.

The DJ 13 is equipped with the following drilling assistant systems:

  • Thrust control, to adjust thrust, pullback force and speed
  • Speed control, drilling at the push of a button
  • Carve mode, for hard ground conditions
  • ADBSe, autmoatic adjustment of speed and torque
  • Electro-hydraulic greasing system
  • Automatic break apart system

Hydraulic anchoring and greasing system

The hydraulic anchoring system works with two independent pillars. The anchoring system has hard-metal teeth. They even drill through asphalt and gravel. Each pillar can be adjusted individually in any angle. If there are pipes in the ground, the anchoring system can even be adjusted sidewise.
Even this small HDD machine has a hydraulic greasing system. It consists of an 8 kg (17.6 lbs) greasing barrel. The grease is a special cooper grease.

Technical Data

*   Depending on ground conditions
** Depending on drill rod size
Technical specifications can be changed without previous notice.

Pullback force
60 kN (6 t)
13,000 lbs
Thrust force
60 kN (6 t)
13,000 lbs
Engine power
Hatz 55 kW (75 PS)
Hatz 55 kW (75 HP)
Torque, max.
2’300 Nm
1,700 ft.lbs
Drill rod rotation speed, max.
225 U/min
225 rpm
Drilling fluid volume
95 l/min
25 gpm
Drilling fluid volume, optional
160 l/min
45 gpm
Drilling fluid pressure, max.
75 bar
1,000 psi
drilling speed – quick gear
40
120 ft/min
drilling speed – at full load
variabel
variable
pullback speed – quick gear
40
120 ft/min
pullback speed – at full load
variabel
variable
ø of the pilot bore
60 – 110 mm
3” – 4.5”
Entry angle, min.
10° (18 %)
10° (18 %)
Entry angle, max
22° (40 %)
22° (40 %)
Backreaming diameter, max.*
ø 300 mm
ø 12″
Maximum drilling length*
100 m
330 ft
Drill rods, length
2.0 m
6.6 ft
Drill rod, diameter
50/42 mm
2″ / 1.77 “
Bending radius, min.**
28 m
95 ft
Driving speed
2.2 km/h
1.1 miles/h
noise emission at operator’s ear – without cabin
85 dB(A)
85 dB(A)
Guaranteed sound power level Lwa
104 dB(A)
104 dB(A)
Dimensions L x W x H (working position)
4.15 x 1.50 x 2.40 m
13,7 x 5,0 x 7,9 ft
Dimensions L x W x H (transportation position)
4.30 x 1.28 x 1.90 m
14,2 x 4,2 x 6,2 ft
Dimensions L x W x H (driving position)
4.25 x 1.25 x 2.40 m
14,0 x 4,1 x 7,9 ft
weight incl. drill rods
4.2 t
9,140 lbs
Weight without drill rods
3.6 t
7,850 lbs

Kontakty

Vedúci servisu

Dezider Baláž
Technické poradentsvo Putzmeister a Dynapac
Diagnostický technik
Tel. kontakt: +421 910 910 451
Email: servis@jamalsk.sk

Vedúci divízie cestnej mechanizácie

Ing. Otokar Macháček
Technické poradenstvo Dynapac a Terra
Diagnostický technik
Tel. kontakt: +421 948 332 182
Email: otokar.machacek@jamalsk.sk

Náhradné diely

Jakub Mihalik
Technické poradenstvo
Tel. kontakt: +421 903 721 664
Email: jamalsk@jamalsk.sk

Kontaktný formulár

    Vaše meno *
    Váš email *
    Telefónne číslo
    Predmet
    Správa

    * povinný údaj

    Táto stránka je chránená pomocou reCAPTCHA a Google zásad ochrany osobných údajov a podmienok používania.

    Kontaktujte nás

    Zaujala vás naša ponuka? Máte nejaké otázky? Neváhajte nás kontaktovať.

    Prejsť na kontakt